ABB EPD24 Busbar

RS tilauskoodi: 914-4629Tuotemerkki: ABBValmistajan osanumero.: 2CDE605100R0500
brand-logo
Näytä kaikki Busbars tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

ABB

Range

EPD24

Series

EPD-BB

For Use With

EPD24-TB-101

Colour

Grey

Alkuperämaa

Germany

Tuotetiedot

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 188,00

kpl (ilman ALV)

€ 233,12

kpl (Sis ALV:n)

ABB EPD24 Busbar

€ 188,00

kpl (ilman ALV)

€ 233,12

kpl (Sis ALV:n)

ABB EPD24 Busbar
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 4€ 188,00
5 - 9€ 179,00
10 - 24€ 163,00
25 - 49€ 154,00
50+€ 145,00

Tekninen dokumentti

Tekniset tiedot

Merkki

ABB

Range

EPD24

Series

EPD-BB

For Use With

EPD24-TB-101

Colour

Grey

Alkuperämaa

Germany

Tuotetiedot

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.