Adafruit Controller Board for DRV2605L for Haptic Motor

RS tilauskoodi: 124-5480Tuotemerkki: ADAFRUIT INDUSTRIESValmistajan osanumero.: 2305
brand-logo

Tekninen dokumentti

Tekniset tiedot

For Use With

Haptic Motor

Kit Classification

Development Board

Featured Device

DRV2605L

Kit Name

Controller Board

Tuotetiedot

Adafruit DRV2605L Haptic Motor Controller Board

This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.

The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.

Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.

Motor Controllers & Drivers

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 11,80

kpl (ilman ALV)

€ 14,63

kpl (Sis ALV:n)

Adafruit Controller Board for DRV2605L for Haptic Motor

€ 11,80

kpl (ilman ALV)

€ 14,63

kpl (Sis ALV:n)

Adafruit Controller Board for DRV2605L for Haptic Motor
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 4€ 11,80
5 - 9€ 10,50
10+€ 9,10

Tekninen dokumentti

Tekniset tiedot

For Use With

Haptic Motor

Kit Classification

Development Board

Featured Device

DRV2605L

Kit Name

Controller Board

Tuotetiedot

Adafruit DRV2605L Haptic Motor Controller Board

This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.

The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.

Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.

Motor Controllers & Drivers