Adafruit FeatherWing Non-Latching Relay for Adafruit Feather

RS tilauskoodi: 124-5530Tuotemerkki: ADAFRUIT INDUSTRIESValmistajan osanumero.: 2895
brand-logo

Tekninen dokumentti

Tekniset tiedot

Power Management Function

Non-Latching Relay

For Use With

Adafruit Feather

Kit Classification

Development Board

Kit Name

FeatherWing

Tuotetiedot

Adafruit Non-Latching Mini Relay FeatherWing

FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The non-latching mini relay FeatherWing gives you control over power so you can now turn on and off various devices including lamps, fans, solenoids. In fact, you can switch power for many small appliances that run on up to 250 V ac but you need check the amount of power – 60 W or less.

The non-latching relay, requires a single control pin, the SET pin. When set to high, the relay switches and a red LED lights. If power is lost then the relay will go back open.

In terms of how much power, you can switch up to 2A of resistive current at up to 30 V dc or 40 V ac. At 110 V dc, switch up to 0.3A, at 120 V ac up to 0.5 A, and at 250 V ac you can switch up to 0.6A. Check the datasheet for more details.

A 3-pin terminal block is supplied with this FeatherWing to wire it up with the device you are controlling and some light soldering is required.

A Latching Relay FeatherWing is also available (RS 124-5527) but requires two signal pins.

Adafruit FeatherWing Add-On Boards

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 11,80

kpl (ilman ALV)

€ 14,63

kpl (Sis ALV:n)

Adafruit FeatherWing Non-Latching Relay for Adafruit Feather

€ 11,80

kpl (ilman ALV)

€ 14,63

kpl (Sis ALV:n)

Adafruit FeatherWing Non-Latching Relay for Adafruit Feather
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 4€ 11,80
5 - 9€ 10,50
10+€ 9,10

Tekninen dokumentti

Tekniset tiedot

Power Management Function

Non-Latching Relay

For Use With

Adafruit Feather

Kit Classification

Development Board

Kit Name

FeatherWing

Tuotetiedot

Adafruit Non-Latching Mini Relay FeatherWing

FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The non-latching mini relay FeatherWing gives you control over power so you can now turn on and off various devices including lamps, fans, solenoids. In fact, you can switch power for many small appliances that run on up to 250 V ac but you need check the amount of power – 60 W or less.

The non-latching relay, requires a single control pin, the SET pin. When set to high, the relay switches and a red LED lights. If power is lost then the relay will go back open.

In terms of how much power, you can switch up to 2A of resistive current at up to 30 V dc or 40 V ac. At 110 V dc, switch up to 0.3A, at 120 V ac up to 0.5 A, and at 250 V ac you can switch up to 0.6A. Check the datasheet for more details.

A 3-pin terminal block is supplied with this FeatherWing to wire it up with the device you are controlling and some light soldering is required.

A Latching Relay FeatherWing is also available (RS 124-5527) but requires two signal pins.

Adafruit FeatherWing Add-On Boards