Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin

RS tilauskoodi: 680-7125Tuotemerkki: Allegro MicrosystemsValmistajan osanumero.: A3212ELHLT-T
brand-logo
Näytä kaikki Motion Sensor ICs tuotteet

Tekninen dokumentti

Tekniset tiedot

Sensor Type

Hall Effect Sensors

Mounting Type

Surface Mount

Magnetic Type

Omnipolar

Maximum Operating Supply Voltage

3.5 V

Minimum Operating Supply Voltage

2.5 V

Height

0.95mm

Dimensions

2.98 x 1.91 x 0.95mm

Minimum Operating Temperature

-40 °C

Pin Count

3

Maximum Operating Temperature

+85 °C

Package Type

SOT-23

Typical Magnetic Sensor Hysteresis

5.9 Gs

Tuotetiedot

A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems

The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.

Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.

Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

Hall Effect Sensors, Allegro MicroSystems

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 0,402

1 kpl (5 kpl/pakkaus) (ilman ALV)

€ 0,498

1 kpl (5 kpl/pakkaus) (Sis ALV:n)

Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
Valitse pakkaustyyppi

€ 0,402

1 kpl (5 kpl/pakkaus) (ilman ALV)

€ 0,498

1 kpl (5 kpl/pakkaus) (Sis ALV:n)

Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
Varastotiedot eivät ole tilapäisesti saatavilla.
Valitse pakkaustyyppi

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Sensor Type

Hall Effect Sensors

Mounting Type

Surface Mount

Magnetic Type

Omnipolar

Maximum Operating Supply Voltage

3.5 V

Minimum Operating Supply Voltage

2.5 V

Height

0.95mm

Dimensions

2.98 x 1.91 x 0.95mm

Minimum Operating Temperature

-40 °C

Pin Count

3

Maximum Operating Temperature

+85 °C

Package Type

SOT-23

Typical Magnetic Sensor Hysteresis

5.9 Gs

Tuotetiedot

A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems

The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.

Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.

Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

Hall Effect Sensors, Allegro MicroSystems