Tekninen dokumentti
Tekniset tiedot
Merkki
CrouzetMonitoring Application
Phase, Voltage
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SP-NO/NC
Voltage Sensitivity
Undervoltage
Phase Sensitivity
Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Dimensions
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Height
92.6mm
Length
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
-20 → +50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Alkuperämaa
France
Tuotetiedot
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 92,50
kpl (ilman ALV)
€ 114,70
kpl (Sis ALV:n)
1
€ 92,50
kpl (ilman ALV)
€ 114,70
kpl (Sis ALV:n)
1
Osta irtotavarana
Määrä | Yksikköhinta |
---|---|
1 - 4 | € 92,50 |
5+ | € 89,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
CrouzetMonitoring Application
Phase, Voltage
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SP-NO/NC
Voltage Sensitivity
Undervoltage
Phase Sensitivity
Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Dimensions
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Height
92.6mm
Length
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
-20 → +50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Alkuperämaa
France
Tuotetiedot
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.