GE 20 → 60W Light Transformer, 220 → 240V, 12V

RS tilauskoodi: 811-7140Tuotemerkki: GEValmistajan osanumero.: 94386
brand-logo

Tekninen dokumentti

Tekniset tiedot

Merkki

GE

Primary Voltage Rating

220 → 240V

Secondary Voltage Rating

12V

Power Rating

20 → 60W

Dimensions

109 x 40 x 20.5 mm

Length

109 mm

Width

40 mm

Depth

20.5 mm

Number of Phases

1

Termination Type

Screw

Alkuperämaa

China

Tuotetiedot

GE Lighting 12 V Dimmable Electronic Transformer

This 12 V Electronic Transformer comes in a brand new compact size design, which makes it the ideal choice for delicate lighting fixtures. Ideal applications for this GE Electronic Transformer are in offices, hospitals, shops, hotels, supermarkets, airports, subways and railway stations.

Approvals

CE, CB
Harmonic: IEC 61000-3-2
EMC: IEC 61547
EMI: CISPR15
Safety: IEC 61347-1, IEC 61347-2-3

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 8,00

kpl (ilman ALV)

€ 9,92

kpl (Sis ALV:n)

GE 20 → 60W Light Transformer, 220 → 240V, 12V

€ 8,00

kpl (ilman ALV)

€ 9,92

kpl (Sis ALV:n)

GE 20 → 60W Light Transformer, 220 → 240V, 12V
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Merkki

GE

Primary Voltage Rating

220 → 240V

Secondary Voltage Rating

12V

Power Rating

20 → 60W

Dimensions

109 x 40 x 20.5 mm

Length

109 mm

Width

40 mm

Depth

20.5 mm

Number of Phases

1

Termination Type

Screw

Alkuperämaa

China

Tuotetiedot

GE Lighting 12 V Dimmable Electronic Transformer

This 12 V Electronic Transformer comes in a brand new compact size design, which makes it the ideal choice for delicate lighting fixtures. Ideal applications for this GE Electronic Transformer are in offices, hospitals, shops, hotels, supermarkets, airports, subways and railway stations.

Approvals

CE, CB
Harmonic: IEC 61000-3-2
EMC: IEC 61547
EMI: CISPR15
Safety: IEC 61347-1, IEC 61347-2-3

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.