Stud Cam Follower NUKR35A, 16mm ID, 35mm OD

RS tilauskoodi: 137-1558Tuotemerkki: INAValmistajan osanumero.: NUKR35A
brand-logo
Näytä kaikki Cam Followers tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

INA

Roller Diameter

35mm

Roller Length

18mm

Type

Stud

Bore Size

16mm

Static Load Rating

18700N

Dynamic Load Rating

15300N

Material

Steel

Tuotetiedot

Stud Type Track Rollers

INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.

INA

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 111,00

kpl (ilman ALV)

€ 137,64

kpl (Sis ALV:n)

Stud Cam Follower NUKR35A, 16mm ID, 35mm OD

€ 111,00

kpl (ilman ALV)

€ 137,64

kpl (Sis ALV:n)

Stud Cam Follower NUKR35A, 16mm ID, 35mm OD
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 4€ 111,00
5 - 9€ 107,00
10 - 24€ 101,00
25+€ 98,50

Tekninen dokumentti

Tekniset tiedot

Merkki

INA

Roller Diameter

35mm

Roller Length

18mm

Type

Stud

Bore Size

16mm

Static Load Rating

18700N

Dynamic Load Rating

15300N

Material

Steel

Tuotetiedot

Stud Type Track Rollers

INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.

INA