Martindale TEK 101 Non Contact Voltage Detector, 180V ac to 600V ac
Tekninen dokumentti
Tekniset tiedot
Merkki
MartindaleIndicator Type
Voltage
Battery Type
9V
Audible Tone
Yes
ATEX Approval
No
Power Source
Battery
Safety Category
CAT IV 1000 V
Weight
120g
Height
25mm
Length
202mm
Maximum Detection Voltage
600V ac
Minimum Detection Voltage
180V ac
Maximum Operating Temperature
+40°C
Width
36mm
Minimum Operating Temperature
-10°C
Model Number p
TEK 101
Safety Category Level
CAT IV
Safety Category Voltage
1000V
Alkuperämaa
Philippines
Tuotetiedot
Martindale Non Contact Voltage Detector MARTEK101
Martindale TEK101 is a simple-to-use non-contact voltage indicator with audible and visual warnings and an extended probe tip for access to confined spaces. It is optimised for identifying energised conductors at voltages within the range 180 V to 600 V AC. Features include a unique built-in 50 Hz proving unit which tests the sensor operation, battery and LED. This unit proves the entire circuit is fully functional, avoiding the need for a separate proving unit. The tip design and optimised sensitivity make it possible to discriminate between adjacent live conductors. The high resolution capability of the TEK101 improves safety and saves time on-site. The pocket sized design conforms to CAT IV 1000 V safety regulations.
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 59,67
kpl (ilman ALV)
€ 73,99
kpl (Sis ALV:n)
1
€ 59,67
kpl (ilman ALV)
€ 73,99
kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
MartindaleIndicator Type
Voltage
Battery Type
9V
Audible Tone
Yes
ATEX Approval
No
Power Source
Battery
Safety Category
CAT IV 1000 V
Weight
120g
Height
25mm
Length
202mm
Maximum Detection Voltage
600V ac
Minimum Detection Voltage
180V ac
Maximum Operating Temperature
+40°C
Width
36mm
Minimum Operating Temperature
-10°C
Model Number p
TEK 101
Safety Category Level
CAT IV
Safety Category Voltage
1000V
Alkuperämaa
Philippines
Tuotetiedot
Martindale Non Contact Voltage Detector MARTEK101
Martindale TEK101 is a simple-to-use non-contact voltage indicator with audible and visual warnings and an extended probe tip for access to confined spaces. It is optimised for identifying energised conductors at voltages within the range 180 V to 600 V AC. Features include a unique built-in 50 Hz proving unit which tests the sensor operation, battery and LED. This unit proves the entire circuit is fully functional, avoiding the need for a separate proving unit. The tip design and optimised sensitivity make it possible to discriminate between adjacent live conductors. The high resolution capability of the TEK101 improves safety and saves time on-site. The pocket sized design conforms to CAT IV 1000 V safety regulations.