Megger MFT1711 Multifunction Tester, 250 V, 500 V, 1000 V , Earth Resistance Measurement With Wireless
Tekninen dokumentti
Tekniset tiedot
Merkki
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
RCD Ramp Test
Yes
Model Number p
MFT1711
Model Number (p)
MFT1711
Non-Tripping
Yes
Insulation Test Voltage
250 V, 500 V, 1000 V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
No
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, S
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
IP Rating
IP54
Dimensions
85 x 235 x 150mm
Power Source
Battery
Width
235mm
Length
85mm
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Battery Type
AA Alkaline
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+55°C
Weight
1 (with Battery; Excluding Case)kg
Safety Category Level
CAT III, CAT IV
Plug Type
BS 1363, LT 300-EN-BS
Minimum Continuity Resistance
0.01Ω
Continuity Range
0 → 100 kO
Minimum Operating Temperature
-10°C
Height
150mm
Operating Temperature Range
-10 → +55 °C
Alkuperämaa
United Kingdom
Tuotetiedot
Megger New MFT1700 Series
The new MFT1700 series from Megger tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The new MFT1700 series includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.
MFT1731 On-Site option is available complete with PowerSuite® Lite software. MFT1731 On-Site provides a professional solution to certification with electronic form completion from stored data within the MFT. Download to a mobile device such as a Smartphone or direct to a PC.
Options in the series include
MFT1711 (RS 117-6026)
MFT1721 (RS 117-6027)
MFT1731 (RS 117-6028)
Supplied with
MFT1711 (RS 117-6026) - Tester, three wire lead set, mains test lead, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1721 (RS 117-6027) - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1731 (RS 117-6028) - Tester, three wire lead set, mains test lead, switched probe, internally rechargeable batteries and charger, 12-month calibration certificate, warranty upgradeable to 3 years & soft pouch.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 1 489,00
kpl (ilman ALV)
€ 1 846,36
kpl (Sis ALV:n)
1
€ 1 489,00
kpl (ilman ALV)
€ 1 846,36
kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
RCD Ramp Test
Yes
Model Number p
MFT1711
Model Number (p)
MFT1711
Non-Tripping
Yes
Insulation Test Voltage
250 V, 500 V, 1000 V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
No
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, S
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
IP Rating
IP54
Dimensions
85 x 235 x 150mm
Power Source
Battery
Width
235mm
Length
85mm
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Battery Type
AA Alkaline
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+55°C
Weight
1 (with Battery; Excluding Case)kg
Safety Category Level
CAT III, CAT IV
Plug Type
BS 1363, LT 300-EN-BS
Minimum Continuity Resistance
0.01Ω
Continuity Range
0 → 100 kO
Minimum Operating Temperature
-10°C
Height
150mm
Operating Temperature Range
-10 → +55 °C
Alkuperämaa
United Kingdom
Tuotetiedot
Megger New MFT1700 Series
The new MFT1700 series from Megger tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The new MFT1700 series includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.
MFT1731 On-Site option is available complete with PowerSuite® Lite software. MFT1731 On-Site provides a professional solution to certification with electronic form completion from stored data within the MFT. Download to a mobile device such as a Smartphone or direct to a PC.
Options in the series include
MFT1711 (RS 117-6026)
MFT1721 (RS 117-6027)
MFT1731 (RS 117-6028)
Supplied with
MFT1711 (RS 117-6026) - Tester, three wire lead set, mains test lead, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1721 (RS 117-6027) - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1731 (RS 117-6028) - Tester, three wire lead set, mains test lead, switched probe, internally rechargeable batteries and charger, 12-month calibration certificate, warranty upgradeable to 3 years & soft pouch.