Microchip HV9120NG-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, SOIC

RS tilauskoodi: 829-3364Tuotemerkki: MicrochipValmistajan osanumero.: HV9120NG-G
brand-logo
Näytä kaikki PWM tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

Microchip

Maximum Switching Frequency

3 MHz

Output Voltage

4.16 V

Output Current

10 mA

Number of Outputs

1

Control Method

Current, Voltage

Fall Time

75ns

Mounting Type

Surface Mount

Rise Time

75ns

Package Type

SOIC

Pin Count

16

Dimensions

10 x 4 x 1.65mm

Maximum Duty Cycle

49.6%

Length

10mm

PWM Controller Type

Current Mode

Width

4mm

Height

1.65mm

Maximum Operating Supply Voltage

13.5 V

Minimum Operating Supply Voltage

9 V

Minimum Operating Temperature

-55 °C

Maximum Operating Temperature

+125 °C

Tuotetiedot

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 4,10

1 kpl (5 kpl/pakkaus) (ilman ALV)

€ 5,084

1 kpl (5 kpl/pakkaus) (Sis ALV:n)

Microchip HV9120NG-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, SOIC
Valitse pakkaustyyppi

€ 4,10

1 kpl (5 kpl/pakkaus) (ilman ALV)

€ 5,084

1 kpl (5 kpl/pakkaus) (Sis ALV:n)

Microchip HV9120NG-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, SOIC
Varastotiedot eivät ole tilapäisesti saatavilla.
Valitse pakkaustyyppi

Osta irtotavarana

MääräYksikköhintaPer Pakkaus
5 - 20€ 4,10€ 20,50
25 - 95€ 4,00€ 20,00
100+€ 3,85€ 19,25

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Merkki

Microchip

Maximum Switching Frequency

3 MHz

Output Voltage

4.16 V

Output Current

10 mA

Number of Outputs

1

Control Method

Current, Voltage

Fall Time

75ns

Mounting Type

Surface Mount

Rise Time

75ns

Package Type

SOIC

Pin Count

16

Dimensions

10 x 4 x 1.65mm

Maximum Duty Cycle

49.6%

Length

10mm

PWM Controller Type

Current Mode

Width

4mm

Height

1.65mm

Maximum Operating Supply Voltage

13.5 V

Minimum Operating Supply Voltage

9 V

Minimum Operating Temperature

-55 °C

Maximum Operating Temperature

+125 °C

Tuotetiedot

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip