Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 4.5 → 5.5 V dc Input, 36W, Surface Mount, +85°C

RS tilauskoodi: 135-9181Tuotemerkki: MurataValmistajan osanumero.: MYMGK1R820FRSR
brand-logo
Näytä kaikki Home tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

Murata

Output Voltage

1.8V dc

Input Voltage Range

4.5 → 5.5 V dc

Power Rating

36W

Input Voltage Nominal

5 V dc

Output Current

20A

Mounting Type

Surface Mount

Number of Outputs

1

Width

9mm

Depth

5.6mm

Length

10.5mm

Series

MGK

Load Regulation

±1%

Minimum Temperature

-40°C

Efficiency

89.2%

Maximum Temperature

+85°C

Standards Met

CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1

Tuotetiedot

Murata Mono Block 20A DC-DC Converter

The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 7,40

kpl (ilman ALV)

€ 9,18

kpl (Sis ALV:n)

Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 4.5 → 5.5 V dc Input, 36W, Surface Mount, +85°C
Valitse pakkaustyyppi

€ 7,40

kpl (ilman ALV)

€ 9,18

kpl (Sis ALV:n)

Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 4.5 → 5.5 V dc Input, 36W, Surface Mount, +85°C
Varastotiedot eivät ole tilapäisesti saatavilla.
Valitse pakkaustyyppi

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Merkki

Murata

Output Voltage

1.8V dc

Input Voltage Range

4.5 → 5.5 V dc

Power Rating

36W

Input Voltage Nominal

5 V dc

Output Current

20A

Mounting Type

Surface Mount

Number of Outputs

1

Width

9mm

Depth

5.6mm

Length

10.5mm

Series

MGK

Load Regulation

±1%

Minimum Temperature

-40°C

Efficiency

89.2%

Maximum Temperature

+85°C

Standards Met

CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1

Tuotetiedot

Murata Mono Block 20A DC-DC Converter

The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.