Murata 3-Axis Surface Mount Sensor, DFL/SMD, SPI, 12-Pin

RS tilauskoodi: 144-6560Tuotemerkki: MurataValmistajan osanumero.: SCA3300-D01-1
brand-logo
Näytä kaikki Motion Sensor ICs tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

Murata

Sensor Type

Accelerometer

Number of Axis

3

Teknologia

Capaitive 3D MEMS

Mounting Type

Surface Mount

Interface Type

SPI

Maximum Frequency Response

88Hz

Minimum Frequency Response

10Hz

Maximum Operating Supply Voltage

3.6 V

Minimum Operating Supply Voltage

3 V

Package Type

DFL/SMD

Sensitivity

1350 LSB/g, 2700 LSB/g, 5400LSB/g

Pin Count

12

Maximum Operating Temperature

+125 °C

Minimum Operating Temperature

-40 °C

Alkuperämaa

Finland

Tuotetiedot

Accelerometer ICs, Murata

Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.

The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.

The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.

Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.

Accelerometers, Murata

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 38,90

kpl (ilman ALV)

€ 48,24

kpl (Sis ALV:n)

Murata 3-Axis Surface Mount Sensor, DFL/SMD, SPI, 12-Pin

€ 38,90

kpl (ilman ALV)

€ 48,24

kpl (Sis ALV:n)

Murata 3-Axis Surface Mount Sensor, DFL/SMD, SPI, 12-Pin
Varastotiedot eivät ole tilapäisesti saatavilla.

Osta irtotavarana

MääräYksikköhinta
1 - 4€ 38,90
5 - 9€ 37,10
10 - 24€ 33,60
25 - 49€ 30,90
50+€ 27,40

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Merkki

Murata

Sensor Type

Accelerometer

Number of Axis

3

Teknologia

Capaitive 3D MEMS

Mounting Type

Surface Mount

Interface Type

SPI

Maximum Frequency Response

88Hz

Minimum Frequency Response

10Hz

Maximum Operating Supply Voltage

3.6 V

Minimum Operating Supply Voltage

3 V

Package Type

DFL/SMD

Sensitivity

1350 LSB/g, 2700 LSB/g, 5400LSB/g

Pin Count

12

Maximum Operating Temperature

+125 °C

Minimum Operating Temperature

-40 °C

Alkuperämaa

Finland

Tuotetiedot

Accelerometer ICs, Murata

Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.

The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.

The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.

Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.

Accelerometers, Murata