DesignSpark, 110.09mm W, 110.09mm L for Use with DesignSpark Raspberry Pi Case

RS tilauskoodi: 122-3464Tuotemerkki: DesignSparkValmistajan osanumero.: ASM-1900048-11
brand-logo

Tekninen dokumentti

Tekniset tiedot

Width

110.09mm

Length

110.09mm

For Use With

DesignSpark Raspberry Pi Case

Alkuperämaa

United Kingdom

Tuotetiedot

VESA Mounting Brackets for DesignSpark Raspberry Pi 3 cases

These VESA mounting brackets enable you to mount a DesignSpark Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points. Note: Pi case not included.

Each bracket includes a locking clip which can be used to prevent the SD card from being removed from the Raspberry Pi.

Within the mounting bracket there is space to add a 2.5 inch hard drive for additional memory for your Raspberry Pi project.

Includes two M3 screws to attach a DesignSpark case to the mounting bracket.

These brackets are available in three colours:

• Clear bracket RS 122-3463
• White bracket RS 122-3464
• Black bracket RS 122-3465

The VESA mounting brackets are suitable for the following DesignSpark Pi cases:

• Clear case RS 103-4296
• White case RS 103-4297
• Black case RS 103-4295
• Black case RS 103-4300

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 2,70

kpl (ilman ALV)

€ 3,35

kpl (Sis ALV:n)

DesignSpark, 110.09mm W, 110.09mm L for Use with DesignSpark Raspberry Pi Case

€ 2,70

kpl (ilman ALV)

€ 3,35

kpl (Sis ALV:n)

DesignSpark, 110.09mm W, 110.09mm L for Use with DesignSpark Raspberry Pi Case
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Width

110.09mm

Length

110.09mm

For Use With

DesignSpark Raspberry Pi Case

Alkuperämaa

United Kingdom

Tuotetiedot

VESA Mounting Brackets for DesignSpark Raspberry Pi 3 cases

These VESA mounting brackets enable you to mount a DesignSpark Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points. Note: Pi case not included.

Each bracket includes a locking clip which can be used to prevent the SD card from being removed from the Raspberry Pi.

Within the mounting bracket there is space to add a 2.5 inch hard drive for additional memory for your Raspberry Pi project.

Includes two M3 screws to attach a DesignSpark case to the mounting bracket.

These brackets are available in three colours:

• Clear bracket RS 122-3463
• White bracket RS 122-3464
• Black bracket RS 122-3465

The VESA mounting brackets are suitable for the following DesignSpark Pi cases:

• Clear case RS 103-4296
• White case RS 103-4297
• Black case RS 103-4295
• Black case RS 103-4300