RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V

RS tilauskoodi: 125-3567Tuotemerkki: RS PRO
brand-logo
Näytä kaikki Pump Controllers tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

RS Pro

Compatible Pump Type

Brushless Micropump

Supply Voltage

6 → 28V

Connection

2 Screw Terminal (Input), 3 Screw Terminal (Output)

IP Rating

IP20

Maximum Output Pressure

10bar

Alkuperämaa

United Kingdom

Tuotetiedot

Brushless Micro Pump Controller

A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 90,00

kpl (ilman ALV)

€ 111,60

kpl (Sis ALV:n)

RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V

€ 90,00

kpl (ilman ALV)

€ 111,60

kpl (Sis ALV:n)

RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Merkki

RS Pro

Compatible Pump Type

Brushless Micropump

Supply Voltage

6 → 28V

Connection

2 Screw Terminal (Input), 3 Screw Terminal (Output)

IP Rating

IP20

Maximum Output Pressure

10bar

Alkuperämaa

United Kingdom

Tuotetiedot

Brushless Micro Pump Controller

A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.