RS PRO Bracket Camera Mounting Bracket for use with Video Surge Protection Device
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProType
Mounting Bracket
For Use With
Video Surge Protection Device
Depth
125 mm
Height
65 mm
Width
25mm
Accessory Type
Bracket
Alkuperämaa
United Kingdom
Tuotetiedot
Modular Network Surge Protectors
This range of protectors safeguard network and communications applications against induced surges and transients.
Approvals
UL 497B and UL Cat 5
Transient Voltage Suppressors (Network)
LANs and WANs are vulnerable to lightning induced surges, static and other interference, particularly on long cable runs and also when a network connects different buildings. Severe damage can occur to MAUs, workstations, hubs, bridges and other peripheral equipment that are not adequately protected.,Network protectors are high energy surge and lightning arrestors that are fitted to the network to limit the hazardous energy to safe levels, They have been specifically designed with safety in mind and exhibit wide bandwidth, low loss, low cross talk, low transfer impedance and are easily fitted, requiring only an earth connection for the diverted surge. Lightning barriers should be used on all data cables running outside of a building and located close to the equipment they are to protect.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 23,60
kpl (ilman ALV)
€ 29,26
kpl (Sis ALV:n)
1
€ 23,60
kpl (ilman ALV)
€ 29,26
kpl (Sis ALV:n)
1
Osta irtotavarana
Määrä | Yksikköhinta |
---|---|
1 - 9 | € 23,60 |
10 - 19 | € 21,20 |
20 - 24 | € 19,10 |
25+ | € 17,20 |
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProType
Mounting Bracket
For Use With
Video Surge Protection Device
Depth
125 mm
Height
65 mm
Width
25mm
Accessory Type
Bracket
Alkuperämaa
United Kingdom
Tuotetiedot
Modular Network Surge Protectors
This range of protectors safeguard network and communications applications against induced surges and transients.
Approvals
UL 497B and UL Cat 5
Transient Voltage Suppressors (Network)
LANs and WANs are vulnerable to lightning induced surges, static and other interference, particularly on long cable runs and also when a network connects different buildings. Severe damage can occur to MAUs, workstations, hubs, bridges and other peripheral equipment that are not adequately protected.,Network protectors are high energy surge and lightning arrestors that are fitted to the network to limit the hazardous energy to safe levels, They have been specifically designed with safety in mind and exhibit wide bandwidth, low loss, low cross talk, low transfer impedance and are easily fitted, requiring only an earth connection for the diverted surge. Lightning barriers should be used on all data cables running outside of a building and located close to the equipment they are to protect.