Siemens Motor Protection Unit, 110 → 240 V ac/dc

RS tilauskoodi: 505-9568Tuotemerkki: SiemensValmistajan osanumero.: 3UF7000-1AU00-0
brand-logo
Näytä kaikki Motor Protection tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

Siemens

Motor Protection Component

Basic Unit

Supply Voltage

110 → 240 V ac/dc

Motor Protection System

SIMOCODE Pro C

Number of Inputs

4

Output

3

Sensing Type

Thermistor

Overall Length

111mm

Overall Width

45mm

Overall Depth

95mm

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

+60°C

Alkuperämaa

Germany

Tuotetiedot

Basic Unit

SIMOCODE (SIRIUS Motor Management and Control Devices) Pro C is a practicable and economical motor management system.SIMOCODE pro is a flexible, modular motor management system it optimizes the connection between I&C and motor system, increases plant availability and allows significant savings to be made for startup, operation and maintenance of a system.,When SIMOCODE pro is installed in the cabinet, it is the intelligent interface between the higher-level automation system and the motor feeder and includes the following:,• Multifunctional, solid-state full motor protection which is independent of the automation system,• Flexible software instead of hardware for the motor control,• Detailed operational, service and diagnostics data,• Open communication through PROFIBUS DP, the standard for fieldbus systems,The Simocode Pro C (Compact) system is used for:,• Direct-on-line and reversing starters,• Actuation of a circuit-breaker (MCCB) with up to 4 binary inputs, up to 3 monostable relay outputs and one thermistor connection (binary PTC),The basic unit 1 is available in two different variants for the following supply voltages:,• 24Vdc,• 110 to 240Vac/dc,Inputs:,• 4 binary inputs, with internal supply from 24Vdc,Outputs:,• 3 (2+1) monostable relay outputs,Thermistor connection for binary PTC,PROFIBUS interface:,• 9-pole SUB-D or,• Terminal connection,Connection of the supply voltage:,• 24Vdc or 110 to 240Vac/dc,Test/Reset button,3 LED's,2 system interfaces for connection of:,• a current measuring module and,• an operator panel,Basic unit 1 is suitable for standard rail mounting or, with additional push-in lugs, for fixing to a mounting plate.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 406,64

kpl (ilman ALV)

€ 504,23

kpl (Sis ALV:n)

Siemens Motor Protection Unit, 110 → 240 V ac/dc

€ 406,64

kpl (ilman ALV)

€ 504,23

kpl (Sis ALV:n)

Siemens Motor Protection Unit, 110 → 240 V ac/dc
Varastotiedot eivät ole tilapäisesti saatavilla.

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Merkki

Siemens

Motor Protection Component

Basic Unit

Supply Voltage

110 → 240 V ac/dc

Motor Protection System

SIMOCODE Pro C

Number of Inputs

4

Output

3

Sensing Type

Thermistor

Overall Length

111mm

Overall Width

45mm

Overall Depth

95mm

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

+60°C

Alkuperämaa

Germany

Tuotetiedot

Basic Unit

SIMOCODE (SIRIUS Motor Management and Control Devices) Pro C is a practicable and economical motor management system.SIMOCODE pro is a flexible, modular motor management system it optimizes the connection between I&C and motor system, increases plant availability and allows significant savings to be made for startup, operation and maintenance of a system.,When SIMOCODE pro is installed in the cabinet, it is the intelligent interface between the higher-level automation system and the motor feeder and includes the following:,• Multifunctional, solid-state full motor protection which is independent of the automation system,• Flexible software instead of hardware for the motor control,• Detailed operational, service and diagnostics data,• Open communication through PROFIBUS DP, the standard for fieldbus systems,The Simocode Pro C (Compact) system is used for:,• Direct-on-line and reversing starters,• Actuation of a circuit-breaker (MCCB) with up to 4 binary inputs, up to 3 monostable relay outputs and one thermistor connection (binary PTC),The basic unit 1 is available in two different variants for the following supply voltages:,• 24Vdc,• 110 to 240Vac/dc,Inputs:,• 4 binary inputs, with internal supply from 24Vdc,Outputs:,• 3 (2+1) monostable relay outputs,Thermistor connection for binary PTC,PROFIBUS interface:,• 9-pole SUB-D or,• Terminal connection,Connection of the supply voltage:,• 24Vdc or 110 to 240Vac/dc,Test/Reset button,3 LED's,2 system interfaces for connection of:,• a current measuring module and,• an operator panel,Basic unit 1 is suitable for standard rail mounting or, with additional push-in lugs, for fixing to a mounting plate.