Tekninen dokumentti
Tekniset tiedot
Merkki
STMicroelectronicsBluetooth Version
4.1
Maximum Output Power
+4dBm
Receiver Sensitivity
-88dBm
Supported Bus Interfaces
GAP, GATT, L2CAP, LL, RFPHY, SM
Supported I/O Interfaces
IRQ, RESET, SPI
Dimensions
13.5 x 11.5 x 2mm
Height
2mm
Length
13.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
11.5mm
Tuotetiedot
SPBTLE-RF, Bluetooth Smart V4.1 Very Low Power Module
The SPBTLE-RF is an easy ready-to-use Bluetooth v4.1 compliant. This Smart master/slave mode network processor module supports multiple roles simultaneously. It can act at the same time as Bluetooth Smart sensor and hub device.
The entire Bluetooth Smart stack and protocols are embedded into SPBTLE-RF B-SmarT module. A standard SPI interface establishes the communication with an external host microcontroller.
The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery.
Bluetooth - STMicroelectronics
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 11,80
kpl (ilman ALV)
€ 14,63
kpl (Sis ALV:n)
1
€ 11,80
kpl (ilman ALV)
€ 14,63
kpl (Sis ALV:n)
1
Osta irtotavarana
Määrä | Yksikköhinta |
---|---|
1 - 9 | € 11,80 |
10 - 49 | € 10,70 |
50 - 99 | € 9,80 |
100 - 499 | € 8,50 |
500+ | € 7,50 |
Tekninen dokumentti
Tekniset tiedot
Merkki
STMicroelectronicsBluetooth Version
4.1
Maximum Output Power
+4dBm
Receiver Sensitivity
-88dBm
Supported Bus Interfaces
GAP, GATT, L2CAP, LL, RFPHY, SM
Supported I/O Interfaces
IRQ, RESET, SPI
Dimensions
13.5 x 11.5 x 2mm
Height
2mm
Length
13.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
11.5mm
Tuotetiedot
SPBTLE-RF, Bluetooth Smart V4.1 Very Low Power Module
The SPBTLE-RF is an easy ready-to-use Bluetooth v4.1 compliant. This Smart master/slave mode network processor module supports multiple roles simultaneously. It can act at the same time as Bluetooth Smart sensor and hub device.
The entire Bluetooth Smart stack and protocols are embedded into SPBTLE-RF B-SmarT module. A standard SPI interface establishes the communication with an external host microcontroller.
The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery.