TE Connectivity Guide

RS tilauskoodi: 718-6760Tuotemerkki: TE ConnectivityValmistajan osanumero.: 1-201046-2
brand-logo

Tekninen dokumentti

Tekniset tiedot

Accessory Type

Guide

Backplane Connector Accessory Type

Guide

Tuotetiedot

TE Connectivity M Series Guide Pins and Sockets

M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.

TE Connectivity M Series Connector

Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 7,00

kpl (ilman ALV)

€ 8,68

kpl (Sis ALV:n)

TE Connectivity Guide
Valitse pakkaustyyppi

€ 7,00

kpl (ilman ALV)

€ 8,68

kpl (Sis ALV:n)

TE Connectivity Guide
Varastotiedot eivät ole tilapäisesti saatavilla.
Valitse pakkaustyyppi

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Accessory Type

Guide

Backplane Connector Accessory Type

Guide

Tuotetiedot

TE Connectivity M Series Guide Pins and Sockets

M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.

TE Connectivity M Series Connector

Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.