TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG

RS tilauskoodi: 136-1900Tuotemerkki: TE ConnectivityValmistajan osanumero.: 967398-000
brand-logo
Näytä kaikki Splice Connectors tuotteet

Tekninen dokumentti

Tekniset tiedot

Splice Type

Butt

Wire Size

22 → 18 AWG

Diameter

3.7mm

Insulation

Insulated

Colour

Red

Insulation Material

Nylon

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Alkuperämaa

Mexico

Tuotetiedot

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 580,00

1000 kpl laatikko (ilman ALV)

€ 719,20

1000 kpl laatikko (Sis ALV:n)

TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG

€ 580,00

1000 kpl laatikko (ilman ALV)

€ 719,20

1000 kpl laatikko (Sis ALV:n)

TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Splice Type

Butt

Wire Size

22 → 18 AWG

Diameter

3.7mm

Insulation

Insulated

Colour

Red

Insulation Material

Nylon

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Alkuperämaa

Mexico

Tuotetiedot

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed