TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 3.56 → 7.11mm Cable Diameter

RS tilauskoodi: 136-2093Tuotemerkki: TE ConnectivityValmistajan osanumero.: D-110-0090
brand-logo
Näytä kaikki Solder Sleeves tuotteet

Tekninen dokumentti

Tekniset tiedot

Minimum Cable Diameter

3.6mm

Maximum Cable Diameter

7mm

Sleeve Length

54.1mm

Material

PVDF

Maximum Operating Temperature

+150°C

Colour

Blue

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Series

D-110

Alkuperämaa

Mexico

Tuotetiedot

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 1 190,00

500 kpl laatikko (ilman ALV)

€ 1 475,60

500 kpl laatikko (Sis ALV:n)

TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 3.56 → 7.11mm Cable Diameter

€ 1 190,00

500 kpl laatikko (ilman ALV)

€ 1 475,60

500 kpl laatikko (Sis ALV:n)

TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 3.56 → 7.11mm Cable Diameter
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Minimum Cable Diameter

3.6mm

Maximum Cable Diameter

7mm

Sleeve Length

54.1mm

Material

PVDF

Maximum Operating Temperature

+150°C

Colour

Blue

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Series

D-110

Alkuperämaa

Mexico

Tuotetiedot

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.