TE Connectivity Temperature & Humidity Sensor, Digital Output, Surface Mount, Serial-I2C, ±2%RH, 6 Pins

RS tilauskoodi: 893-7146PTuotemerkki: TE ConnectivityValmistajan osanumero.: HPP845E031R5
brand-logo

Tekninen dokumentti

Tekniset tiedot

Sensor Function

Temperature & Humidity

Output Type

Digital

Interface Type

Serial-I2C

Accuracy

±2%RH

Mounting Type

Surface Mount

Pin Count

6

Minimum Operating Temperature

-40 °C

Operating Temperature Range

-40 to +125 °C

Maximum Operating Temperature

+125 °C

Minimum Operating Supply Voltage

1.5 V

Maximum Operating Supply Voltage

3.6 V

Package Type

DFN

Length

3mm

Height

0.9mm

Width

3mm

Dimensions

3 x 3 x 0.9mm

Resolution

0.7 %RH

Tuotetiedot

TE Connectivity HTU21D(F) Series Digital Humidity Sensors with Temperature Output

The HTU21D(F) is a digital humidity sensor with temperature output by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 x 0.9 mm footprint. This sensor provides calibrated, linearized signals in digital, I²C format.

HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints.

Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Low battery can be detected and a checksum improves communication reliability. The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T).

With MEAS’ improvements and miniaturization of this sensor, the performance-to-price ratio has been improved – and eventually, any device should benefit from its cutting edge energy saving operation mode.

Temperature & Humidity Sensors, TE Connectivity

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 3,05

kpl (toimitus kelassa) (ilman ALV)

€ 3,78

kpl (toimitus kelassa) (Sis ALV:n)

TE Connectivity Temperature & Humidity Sensor, Digital Output, Surface Mount, Serial-I2C, ±2%RH, 6 Pins
Valitse pakkaustyyppi

€ 3,05

kpl (toimitus kelassa) (ilman ALV)

€ 3,78

kpl (toimitus kelassa) (Sis ALV:n)

TE Connectivity Temperature & Humidity Sensor, Digital Output, Surface Mount, Serial-I2C, ±2%RH, 6 Pins
Varastotiedot eivät ole tilapäisesti saatavilla.
Valitse pakkaustyyppi

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Sensor Function

Temperature & Humidity

Output Type

Digital

Interface Type

Serial-I2C

Accuracy

±2%RH

Mounting Type

Surface Mount

Pin Count

6

Minimum Operating Temperature

-40 °C

Operating Temperature Range

-40 to +125 °C

Maximum Operating Temperature

+125 °C

Minimum Operating Supply Voltage

1.5 V

Maximum Operating Supply Voltage

3.6 V

Package Type

DFN

Length

3mm

Height

0.9mm

Width

3mm

Dimensions

3 x 3 x 0.9mm

Resolution

0.7 %RH

Tuotetiedot

TE Connectivity HTU21D(F) Series Digital Humidity Sensors with Temperature Output

The HTU21D(F) is a digital humidity sensor with temperature output by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 x 0.9 mm footprint. This sensor provides calibrated, linearized signals in digital, I²C format.

HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints.

Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Low battery can be detected and a checksum improves communication reliability. The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T).

With MEAS’ improvements and miniaturization of this sensor, the performance-to-price ratio has been improved – and eventually, any device should benefit from its cutting edge energy saving operation mode.

Temperature & Humidity Sensors, TE Connectivity