Tekninen dokumentti
Tekniset tiedot
Merkki
EntrelecColour
Blue
Number of Levels
Single
Series
ZS95
Termination Method
Spring Clamp
Cable CSA
2.5mm²
Voltage Rating
1 kV ac
Current Rating
24A
Pitch
5.2mm
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+40°C
Hazardous Area Certification
ATEX
Tuotetiedot
ZK2.5 PI-Spring Feed-Through Terminal Blocks
ZK2.5 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 1,80
kpl (ilman ALV)
€ 2,26
kpl (Sis ALV:n)
1
€ 1,80
kpl (ilman ALV)
€ 2,26
kpl (Sis ALV:n)
1
Osta irtotavarana
Määrä | Yksikköhinta |
---|---|
1 - 5 | € 1,80 |
6 - 11 | € 1,70 |
12+ | € 1,60 |
Tekninen dokumentti
Tekniset tiedot
Merkki
EntrelecColour
Blue
Number of Levels
Single
Series
ZS95
Termination Method
Spring Clamp
Cable CSA
2.5mm²
Voltage Rating
1 kV ac
Current Rating
24A
Pitch
5.2mm
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+40°C
Hazardous Area Certification
ATEX
Tuotetiedot
ZK2.5 PI-Spring Feed-Through Terminal Blocks
ZK2.5 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).