Connector 4 nexus trace connect

RS tilauskoodi: 737-9895Tuotemerkki: MicrochipValmistajan osanumero.: ATAVR-MICTOR38
brand-logo
Näytä kaikki Chip Programmers tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

Atmel

Kit Classification

Development Kit

Tuotetiedot

Mictor 38 Trace Connector

The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.

Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.

Saatat olla kiinnostunut

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

P.O.A.

Connector 4 nexus trace connect

1

Pakkauskoko 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

Connector 4 nexus trace connect
Varastotiedot eivät ole tilapäisesti saatavilla.

1

Pakkauskoko 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.
Saatat olla kiinnostunut

Tekninen dokumentti

Tekniset tiedot

Merkki

Atmel

Kit Classification

Development Kit

Tuotetiedot

Mictor 38 Trace Connector

The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.

Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.

Saatat olla kiinnostunut