Tekninen dokumentti
Tekniset tiedot
Merkki
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Through Hole
Maximum Reset Active Time
700ms
Package Type
TO-92
Pin Count
3
Dimensions
4.71 x 3.62 x 4.62mm
Maximum Monitored Voltage
4.5V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Monitored Voltage
4.37V
Minimum Operating Supply Voltage
1 V
Alkuperämaa
Taiwan, Province Of China
Tuotetiedot
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,665
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 0,825
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
€ 0,665
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 0,825
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
Osta irtotavarana
Määrä | Yksikköhinta | Per Pakkaus |
---|---|---|
10 - 20 | € 0,665 | € 6,65 |
30 - 90 | € 0,624 | € 6,24 |
100+ | € 0,585 | € 5,85 |
Tekninen dokumentti
Tekniset tiedot
Merkki
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Through Hole
Maximum Reset Active Time
700ms
Package Type
TO-92
Pin Count
3
Dimensions
4.71 x 3.62 x 4.62mm
Maximum Monitored Voltage
4.5V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Monitored Voltage
4.37V
Minimum Operating Supply Voltage
1 V
Alkuperämaa
Taiwan, Province Of China
Tuotetiedot
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.