Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactNumber Of Contacts
9
Gender
Male
Body Orientation
Right Angle
Mounting Type
Cable Mount
Termination Method
Screw Terminal
Current Rating
100mA
Housing Material
Metal Plated ABS
Voltage Rating
5.0 V
Length
72.0mm
Width
16.8mm
Depth
34.8mm
Series
SUBCON-PLUS-PROFIB/90/IDC
Dimensions
72 x 16.8 x 34.8mm
Minimum Operating Temperature
-20.0°C
Maximum Operating Temperature
+75°C
Alkuperämaa
Germany
Tuotetiedot
Phoenix Contact SUBCON-PLUS PROFIBUS D-Sub Connectors
Phoenix Contact SUBCON-PLUS PROFIBUS 9 pin D-sub connectors are designed for use in PROFIBUS systems up to 12 Mbps allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS PROFIBUS d-sub connectors have an integrated terminating resistor which can be activated externally by a slide switch, surge protection, a shielded ABS housing and can all be used with standard PROFIBUS cables with an outside diameter of 8mm (type A & B)
For PROFIBUS cable quick stripping tool see stock number 801-8967
For cable stripping tool see stock number 803-4326
For screwdriver see stock number 803-4351
BUS connectors
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 68,50
€ 68,50 kpl (ilman ALV)
€ 85,97
€ 85,97 kpl (Sis ALV:n)
1
€ 68,50
€ 68,50 kpl (ilman ALV)
€ 85,97
€ 85,97 kpl (Sis ALV:n)
1
Osta irtotavarana
Määrä | Yksikköhinta |
---|---|
1 - 9 | € 68,50 |
10 - 24 | € 58,00 |
25 - 49 | € 50,50 |
50+ | € 42,40 |
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactNumber Of Contacts
9
Gender
Male
Body Orientation
Right Angle
Mounting Type
Cable Mount
Termination Method
Screw Terminal
Current Rating
100mA
Housing Material
Metal Plated ABS
Voltage Rating
5.0 V
Length
72.0mm
Width
16.8mm
Depth
34.8mm
Series
SUBCON-PLUS-PROFIB/90/IDC
Dimensions
72 x 16.8 x 34.8mm
Minimum Operating Temperature
-20.0°C
Maximum Operating Temperature
+75°C
Alkuperämaa
Germany
Tuotetiedot
Phoenix Contact SUBCON-PLUS PROFIBUS D-Sub Connectors
Phoenix Contact SUBCON-PLUS PROFIBUS 9 pin D-sub connectors are designed for use in PROFIBUS systems up to 12 Mbps allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS PROFIBUS d-sub connectors have an integrated terminating resistor which can be activated externally by a slide switch, surge protection, a shielded ABS housing and can all be used with standard PROFIBUS cables with an outside diameter of 8mm (type A & B)
For PROFIBUS cable quick stripping tool see stock number 801-8967
For cable stripping tool see stock number 803-4326
For screwdriver see stock number 803-4351