Phoenix Contact 3031076 ST 1.5 Series Grey, 0.08 → 1.5mm², Single-Level, Spring Clamp Termination, ATEX, IECEx
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Grey
Number of Levels
Single
Series
ST 1.5
American Wire Gauge
28 → 16AWG
Termination Method
Spring Clamp
Cable CSA
0.08 → 1.5mm²
Voltage Rating
500 V
Current Rating
17.5A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+110°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
EAC
Model Number
ST 1,5
Alkuperämaa
Germany
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
€ 5,75
€ 1,15 1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 7,22
€ 1,443 1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
€ 5,75
€ 1,15 1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 7,22
€ 1,443 1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Grey
Number of Levels
Single
Series
ST 1.5
American Wire Gauge
28 → 16AWG
Termination Method
Spring Clamp
Cable CSA
0.08 → 1.5mm²
Voltage Rating
500 V
Current Rating
17.5A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+110°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
EAC
Model Number
ST 1,5
Alkuperämaa
Germany
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².