RS PRO White Sealant Paste 310 ml Cartridge
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProColour
White
Sealant Type
Silicone Sealant
Application
Copper, Semiconductor Junction Protection
Package Size
310 ml
Package Type
Cartridge
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+150°C
Food Processing Safe
No
Chemical Type
Elastomer
Physical Properties
Neutral Cure, Non-Corrosive
Cure Time
7 (23 °C) days
Product Form
Paste
Tensile Strength
210N/cm
Operating Temperature Range
-40 → +150 °C
Chemical Composition
Stearic Acid
Specific Gravity
1.43
Special Features
Non Corrosive
Hardness
32 Shore A
Odour
Sweet
Alkuperämaa
Belgium
Tuotetiedot
Non-Corrosive Silicone Sealant
One-component, room temperature curing silicone elastomer. Cross linking takes place in the presence of moisture in the air to form a flexible resilient silicone rubber. The material does not evolve any corrosive volatiles, e.g. acetic acid, amines, during cure and is therefore suitable for use on copper, its alloys and other sensitive metals. This property also results in a very low odour emission compared to acetoxy grades. The thixotropic paste has excellent adhesion to most materials (except PTFE and polyethylene) and can withstand temperatures of -40°C to +150°C whilst still maintaining chemical resistance. Typical uses are protection of semiconductor junctions, finishing protection of assemblies and delicate devices, sealing to copper clad items.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 31,40
kpl (ilman ALV)
€ 39,41
kpl (Sis ALV:n)
1
€ 31,40
kpl (ilman ALV)
€ 39,41
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 5 | € 31,40 |
| 6 - 14 | € 29,90 |
| 15+ | € 29,20 |
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProColour
White
Sealant Type
Silicone Sealant
Application
Copper, Semiconductor Junction Protection
Package Size
310 ml
Package Type
Cartridge
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+150°C
Food Processing Safe
No
Chemical Type
Elastomer
Physical Properties
Neutral Cure, Non-Corrosive
Cure Time
7 (23 °C) days
Product Form
Paste
Tensile Strength
210N/cm
Operating Temperature Range
-40 → +150 °C
Chemical Composition
Stearic Acid
Specific Gravity
1.43
Special Features
Non Corrosive
Hardness
32 Shore A
Odour
Sweet
Alkuperämaa
Belgium
Tuotetiedot
Non-Corrosive Silicone Sealant
One-component, room temperature curing silicone elastomer. Cross linking takes place in the presence of moisture in the air to form a flexible resilient silicone rubber. The material does not evolve any corrosive volatiles, e.g. acetic acid, amines, during cure and is therefore suitable for use on copper, its alloys and other sensitive metals. This property also results in a very low odour emission compared to acetoxy grades. The thixotropic paste has excellent adhesion to most materials (except PTFE and polyethylene) and can withstand temperatures of -40°C to +150°C whilst still maintaining chemical resistance. Typical uses are protection of semiconductor junctions, finishing protection of assemblies and delicate devices, sealing to copper clad items.