Ruland Beam Coupling, 13mm Outside Diameter, 4mm Bore, 19.1mm Length Coupler
Tekninen dokumentti
Tekniset tiedot
Merkki
RulandCoupling Types
Beam Coupling
Bore
4mm
Outside Diameter
13mm
Length
19.1mm
Misalignment - Angular
3°
Misalignment - Parallel
0.2mm
Misalignment - Axial
0.13mm
Misalignment - Axial
0.127mm
Alkuperämaa
United States
Tuotetiedot
Aluminium Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 32,70
kpl (ilman ALV)
€ 41,04
kpl (Sis ALV:n)
1
€ 32,70
kpl (ilman ALV)
€ 41,04
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 32,70 |
| 5 - 9 | € 31,40 |
| 10 - 24 | € 29,60 |
| 25+ | € 29,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
RulandCoupling Types
Beam Coupling
Bore
4mm
Outside Diameter
13mm
Length
19.1mm
Misalignment - Angular
3°
Misalignment - Parallel
0.2mm
Misalignment - Axial
0.13mm
Misalignment - Axial
0.127mm
Alkuperämaa
United States
Tuotetiedot
Aluminium Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.