Alps Alpine Incremental Incremental Encoder, 15 ppr, Solid Type, 6mm Shaft
Tekninen dokumentti
Tekniset tiedot
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Merkki
Alps AlpineMounting Type
Panel Mount
Supply Voltage
5 V dc
Alkuperämaa
Japan
Tuotetiedot
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 5,30
1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 6,572
1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
€ 5,30
1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 6,572
1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
Osta irtotavarana
| Määrä | Yksikköhinta | Per Pakkaus |
|---|---|---|
| 5 - 20 | € 5,30 | € 26,50 |
| 25 - 95 | € 4,65 | € 23,25 |
| 100 - 245 | € 4,05 | € 20,25 |
| 250 - 495 | € 3,80 | € 19,00 |
| 500+ | € 3,60 | € 18,00 |
Tekninen dokumentti
Tekniset tiedot
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Merkki
Alps AlpineMounting Type
Panel Mount
Supply Voltage
5 V dc
Alkuperämaa
Japan
Tuotetiedot
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions