Analog Devices ADM5170APZ, Line Driver, 8 CMOS, 28-Pin PLCC

RS tilauskoodi: 877-9091Tuotemerkki: Analog DevicesValmistajan osanumero.: ADM5170APZIMPA: 0
brand-logo
Näytä kaikki ADSL Interface ICs tuotteet

Tekninen dokumentti

Tekniset tiedot

Power Supply Type

Dual

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+85 °C

Output Type

CMOS

Mounting Type

Surface Mount

Pin Count

28

Typical Slew Rate

10V/µs

Dimensions

11.58 x 11.58 x 3.94mm

Typical Dual Supply Voltage

±15V

Height

3.94mm

Length

11.58mm

Width

11.58mm

Package Type

PLCC

Alkuperämaa

Ireland

Tuotetiedot

dsPIC Starter Kit

The MPLAB Starter Kit for dsPIC Digital Signal Controllers connects directly to the USB port on a PC. The USB connection supplies both communications and power to the board. The starter kit includes debug and programmer circuitry that allows applications to be programmed onto the board’s dsPIC33 device and then debugged, all using MPLAB IDE. Audio input signals from an external microphone or audio equipment are routed to the ADC module in the on-board dsPIC33 device for software processing. Alternatively, applications can use the audio codec for converting the audio signal. Output signals can be generated by the dsPIC33 device’s Output Compare module as a pulse-width modulated (PWM) digital waveform. This PWM signal is converted to an analogue signal by a low-pass filter on the starter kit board. Alternatively, applications can output audio data using the audio codec. The output audio signal is then amplified using a headphone amplifier circuit for playback on an output device.

Supplied with

USB cable, CD containing MPLAB IDE, MPLAB C Compiler for dsPIC DSCs, application notes and sample programs.

dsPIC® Development Tools

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

P.O.A.

Analog Devices ADM5170APZ, Line Driver, 8 CMOS, 28-Pin PLCC

P.O.A.

Analog Devices ADM5170APZ, Line Driver, 8 CMOS, 28-Pin PLCC
Varastotiedot eivät ole tilapäisesti saatavilla.

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Power Supply Type

Dual

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+85 °C

Output Type

CMOS

Mounting Type

Surface Mount

Pin Count

28

Typical Slew Rate

10V/µs

Dimensions

11.58 x 11.58 x 3.94mm

Typical Dual Supply Voltage

±15V

Height

3.94mm

Length

11.58mm

Width

11.58mm

Package Type

PLCC

Alkuperämaa

Ireland

Tuotetiedot

dsPIC Starter Kit

The MPLAB Starter Kit for dsPIC Digital Signal Controllers connects directly to the USB port on a PC. The USB connection supplies both communications and power to the board. The starter kit includes debug and programmer circuitry that allows applications to be programmed onto the board’s dsPIC33 device and then debugged, all using MPLAB IDE. Audio input signals from an external microphone or audio equipment are routed to the ADC module in the on-board dsPIC33 device for software processing. Alternatively, applications can use the audio codec for converting the audio signal. Output signals can be generated by the dsPIC33 device’s Output Compare module as a pulse-width modulated (PWM) digital waveform. This PWM signal is converted to an analogue signal by a low-pass filter on the starter kit board. Alternatively, applications can output audio data using the audio codec. The output audio signal is then amplified using a headphone amplifier circuit for playback on an output device.

Supplied with

USB cable, CD containing MPLAB IDE, MPLAB C Compiler for dsPIC DSCs, application notes and sample programs.

dsPIC® Development Tools

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja