Kübler K 07.20 Counter Counter, 7 Digit
Tekninen dokumentti
Tekniset tiedot
Merkki
KüblerCount Mode
Impulses
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Mounting Type
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Function
Counter
Cutout Size
30 x 13 mm
Measurement Range
0 → 9999999
Minimum Operating Temperature
-10°C
Minimum Measurement
0
Cutout Height
15mm
Series
K 07.20
Cutout Width
35mm
Depth
32.7mm
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maximum Operating Temperature
+60°C
Alkuperämaa
Germany
Tuotetiedot
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 38,49
kpl (ilman ALV)
€ 48,31
kpl (Sis ALV:n)
1
€ 38,49
kpl (ilman ALV)
€ 48,31
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 38,49 |
| 5 - 9 | € 37,33 |
| 10+ | € 35,79 |
Tekninen dokumentti
Tekniset tiedot
Merkki
KüblerCount Mode
Impulses
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Mounting Type
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Function
Counter
Cutout Size
30 x 13 mm
Measurement Range
0 → 9999999
Minimum Operating Temperature
-10°C
Minimum Measurement
0
Cutout Height
15mm
Series
K 07.20
Cutout Width
35mm
Depth
32.7mm
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maximum Operating Temperature
+60°C
Alkuperämaa
Germany
Tuotetiedot
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.