Tekninen dokumentti
Tekniset tiedot
Number of Channels per Chip
1
Rail to Rail
Rail to Rail Input/Output
Power Supply Type
Single
Pin Count
5
Minimum Operating Temperature
-40 °C
Mounting Type
Surface Mount
Typical Slew Rate
0.5V/µs
Maximum Operating Temperature
+125 °C
Amplifier Type
General Purpose
Typical Gain Bandwidth Product
1MHz
Typical Input Voltage Noise Density
28nV/√Hz
Typical Voltage Gain
110 dB
Typical Single Supply Voltage
1.8 → 6 V
Width
1.8mm
Height
1.3mm
Length
3.1mm
Package Type
SOT-23
Merkki
MicrochipDimensions
3.1 x 1.8 x 1.3mm
Tuotetiedot
MINIPRO-TL866A EEPROM/FLASH Programmer
The MINIPRO-TL866A from Seeit is a universal programmer designed for use with over 13000 devices including; EPROMS, EEPROMs, SPI FLASHs, DataFlash and MCUs. A full list of compatible devices can be found on the datasheet.
A Fast SPI algorithm mode enables the MINIPRO-TL866A to provide fast programming. Simply connect the MINIPRO-TL866A to a PC via a USB port. There is no need for an external power supply.
The components are attached directly to the ZIF40 socket or through the HE10 connector (ICSP cable provided).
PC Based Programmers
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 0,316
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 0,392
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
Standardi
10
€ 0,316
1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 0,392
1 kpl (10 kpl/pakkaus) (Sis ALV:n)
Standardi
10
Tekninen dokumentti
Tekniset tiedot
Number of Channels per Chip
1
Rail to Rail
Rail to Rail Input/Output
Power Supply Type
Single
Pin Count
5
Minimum Operating Temperature
-40 °C
Mounting Type
Surface Mount
Typical Slew Rate
0.5V/µs
Maximum Operating Temperature
+125 °C
Amplifier Type
General Purpose
Typical Gain Bandwidth Product
1MHz
Typical Input Voltage Noise Density
28nV/√Hz
Typical Voltage Gain
110 dB
Typical Single Supply Voltage
1.8 → 6 V
Width
1.8mm
Height
1.3mm
Length
3.1mm
Package Type
SOT-23
Merkki
MicrochipDimensions
3.1 x 1.8 x 1.3mm
Tuotetiedot
MINIPRO-TL866A EEPROM/FLASH Programmer
The MINIPRO-TL866A from Seeit is a universal programmer designed for use with over 13000 devices including; EPROMS, EEPROMs, SPI FLASHs, DataFlash and MCUs. A full list of compatible devices can be found on the datasheet.
A Fast SPI algorithm mode enables the MINIPRO-TL866A to provide fast programming. Simply connect the MINIPRO-TL866A to a PC via a USB port. There is no need for an external power supply.
The components are attached directly to the ZIF40 socket or through the HE10 connector (ICSP cable provided).