Phoenix Contact 3RS7025 Series Signal Conditioner, Frequency Input, Current, Voltage Output, 9.6 → 30V dc
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactModule Type
Frequency Converter
Input Signal Type
Frequency
Output Signal Type
Current, Voltage
Input Range
0.002 Hz → 20kHz
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
3RS7025
Maximum Operating Temperature
+65°C
Termination
Screw
Number of Channels
1
Minimum Operating Temperature
-20°C
Distrelec Product Id
30348073
Alkuperämaa
Germany
Tuotetiedot
Frequency Converter to Current/Voltage
Phoenix Contacts 2902832 is a 3-way, configurable isolated frequency transducer. This transducer can accept NAMUR proximity sensors, NPN and PNP outputs. Not to mention, this module has a DIP switches on the side that allow you to configure the device easily. The modules frequency range can also be adjusted by the teach-in wheel.
2902832 will convert any measured signal into linear current or a voltage signal, while also fully supporting fault monitoring.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 273,00
kpl (ilman ALV)
€ 342,62
kpl (Sis ALV:n)
1
€ 273,00
kpl (ilman ALV)
€ 342,62
kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactModule Type
Frequency Converter
Input Signal Type
Frequency
Output Signal Type
Current, Voltage
Input Range
0.002 Hz → 20kHz
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
3RS7025
Maximum Operating Temperature
+65°C
Termination
Screw
Number of Channels
1
Minimum Operating Temperature
-20°C
Distrelec Product Id
30348073
Alkuperämaa
Germany
Tuotetiedot
Frequency Converter to Current/Voltage
Phoenix Contacts 2902832 is a 3-way, configurable isolated frequency transducer. This transducer can accept NAMUR proximity sensors, NPN and PNP outputs. Not to mention, this module has a DIP switches on the side that allow you to configure the device easily. The modules frequency range can also be adjusted by the teach-in wheel.
2902832 will convert any measured signal into linear current or a voltage signal, while also fully supporting fault monitoring.