Phoenix Contact Grey ST 2.5 Feed Through Terminal Block, Single level, 0.2 → 6mm², 800 V
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Grey
Number of Levels
Single
Series
ST 2.5
American Wire Gauge
28 → 12AWG
Termination Method
Spring Clamp
Cable CSA
0.2 → 6mm²
Voltage Rating
800 V
Current Rating
24A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+110°C
Model Number
ST 2,5
Alkuperämaa
Germany
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 1,25
1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 1,569
1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
€ 1,25
1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 1,569
1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
Tekninen dokumentti
Tekniset tiedot
Merkki
Phoenix ContactColour
Grey
Number of Levels
Single
Series
ST 2.5
American Wire Gauge
28 → 12AWG
Termination Method
Spring Clamp
Cable CSA
0.2 → 6mm²
Voltage Rating
800 V
Current Rating
24A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+110°C
Model Number
ST 2,5
Alkuperämaa
Germany
Tuotetiedot
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².