Tekninen dokumentti
Tekniset tiedot
Merkki
Red LionSupply Voltage
9 → 30 V dc
Overall Height
114.3mm
Overall Width
22.9mm
Minimum Operating Temperature
-18°C
Mounting Type
Flush Mount
Maximum Operating Temperature
+60°C
Alkuperämaa
United States
Tuotetiedot
ASTC Series Inline Pre Amplifier
The ASTC In-Line amplifier boosts magnetic pickup signals by a factor of more than 100, and also provides an NPN Open-Collector pulse output. Low speed input sensitivity is 20 millivolts which permits operation at 1/50th of the 1-Volt. The unit is epoxy-encapsulated in a 3/4" Diameter stainless steel shell, with overall dimensions of 0.9" depth x 4.5" length and includes Neoprene strain-reliefs on each end. In installations where long signal runs are to be made it is advisable to keep the ASTC close to the magnetic pickup and make the longer cable run with the output from the ASTC. Input and output cables should not be run in conduit, cable troughs, or bundles with power or control voltage lines.
Red Lion
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 94,50
kpl (ilman ALV)
€ 117,18
kpl (Sis ALV:n)
1
€ 94,50
kpl (ilman ALV)
€ 117,18
kpl (Sis ALV:n)
1
Osta irtotavarana
Määrä | Yksikköhinta |
---|---|
1 - 4 | € 94,50 |
5 - 9 | € 89,50 |
10+ | € 85,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
Red LionSupply Voltage
9 → 30 V dc
Overall Height
114.3mm
Overall Width
22.9mm
Minimum Operating Temperature
-18°C
Mounting Type
Flush Mount
Maximum Operating Temperature
+60°C
Alkuperämaa
United States
Tuotetiedot
ASTC Series Inline Pre Amplifier
The ASTC In-Line amplifier boosts magnetic pickup signals by a factor of more than 100, and also provides an NPN Open-Collector pulse output. Low speed input sensitivity is 20 millivolts which permits operation at 1/50th of the 1-Volt. The unit is epoxy-encapsulated in a 3/4" Diameter stainless steel shell, with overall dimensions of 0.9" depth x 4.5" length and includes Neoprene strain-reliefs on each end. In installations where long signal runs are to be made it is advisable to keep the ASTC close to the magnetic pickup and make the longer cable run with the output from the ASTC. Input and output cables should not be run in conduit, cable troughs, or bundles with power or control voltage lines.