RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V, +80°C
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProCompatible Pump Type
Brushless Micropump
Supply Voltage
6 → 28V
Connection
2 Screw Terminal (Input), 3 Screw Terminal (Output)
IP Rating
IP20
Maximum Fluid Temperature
+80°C
Maximum Output Pressure
10bar
Alkuperämaa
United Kingdom
Tuotetiedot
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 97,50
€ 97,50 kpl (ilman ALV)
€ 122,36
€ 122,36 kpl (Sis ALV:n)
1
€ 97,50
€ 97,50 kpl (ilman ALV)
€ 122,36
€ 122,36 kpl (Sis ALV:n)
1
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProCompatible Pump Type
Brushless Micropump
Supply Voltage
6 → 28V
Connection
2 Screw Terminal (Input), 3 Screw Terminal (Output)
IP Rating
IP20
Maximum Fluid Temperature
+80°C
Maximum Output Pressure
10bar
Alkuperämaa
United Kingdom
Tuotetiedot
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.