Weidmuller 0128360000 SAK Series Beige, Yellow, 4mm², Single-Level, Feed Through Termination, ATEX, IECEx
Tekninen dokumentti
Tekniset tiedot
Merkki
WeidmüllerColour
Beige, Yellow
Number of Levels
Single
Series
SAK
American Wire Gauge
26 → 10AWG
Termination Method
Feed Through
Cable CSA
4mm²
Voltage Rating
800 V
Current Rating
32A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+100°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
IEC 60947-7-1
Distrelec Product Id
30399995
Alkuperämaa
Romania
Tuotetiedot
Standard Terminals, End Covers, and Jumper Bars
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Approvals
CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO
SAK Series
Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting
€ 17,00
€ 1,70 1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 21,34
€ 2,134 1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
€ 17,00
€ 1,70 1 kpl (10 kpl/pakkaus) (ilman ALV)
€ 21,34
€ 2,134 1 kpl (10 kpl/pakkaus) (Sis ALV:n)
10
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
Tekninen dokumentti
Tekniset tiedot
Merkki
WeidmüllerColour
Beige, Yellow
Number of Levels
Single
Series
SAK
American Wire Gauge
26 → 10AWG
Termination Method
Feed Through
Cable CSA
4mm²
Voltage Rating
800 V
Current Rating
32A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+100°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
IEC 60947-7-1
Distrelec Product Id
30399995
Alkuperämaa
Romania
Tuotetiedot
Standard Terminals, End Covers, and Jumper Bars
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Approvals
CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO
SAK Series
Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting