Hengstler TICO 772 Counter, 6 Digit LCD, 60kHz, 12 → 30 V dc
Tekninen dokumentti
Tekniset tiedot
Merkki
HengstlerSupply Voltage
12 → 30 V dc
Count Mode
Minutes, Seconds
Display Type
LCD
Function
Counter
Input Type
Voltage
Connection Type
Plug, Screw
Reset Method
Automatic, Manual
Number Of Digits
6
Mounting Type
Panel Mount
Output / Interface
Relay
Digit Height
9.3 mm
Backlighting
Yes
Maximum Count Frequency
60kHz
Display Range
0.0001 → 99 9999
Measurement Range
0.0001 → 99 9999
Minimum Operating Temperature
0°C
Series
TICO 772
Weight
200g
Maximum Operating Temperature
+50°C
Alkuperämaa
Germany
Tuotetiedot
Multifunctional Counter - tico 772
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.
€ 282,00
€ 282,00 kpl (ilman ALV)
€ 353,91
€ 353,91 kpl (Sis ALV:n)
1
€ 282,00
€ 282,00 kpl (ilman ALV)
€ 353,91
€ 353,91 kpl (Sis ALV:n)
1
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 282,00 |
| 5 - 9 | € 273,00 |
| 10+ | € 267,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
HengstlerSupply Voltage
12 → 30 V dc
Count Mode
Minutes, Seconds
Display Type
LCD
Function
Counter
Input Type
Voltage
Connection Type
Plug, Screw
Reset Method
Automatic, Manual
Number Of Digits
6
Mounting Type
Panel Mount
Output / Interface
Relay
Digit Height
9.3 mm
Backlighting
Yes
Maximum Count Frequency
60kHz
Display Range
0.0001 → 99 9999
Measurement Range
0.0001 → 99 9999
Minimum Operating Temperature
0°C
Series
TICO 772
Weight
200g
Maximum Operating Temperature
+50°C
Alkuperämaa
Germany
Tuotetiedot
Multifunctional Counter - tico 772
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.