Sensata Crydom DRC Series Solid State Relay, 4.8 A Load, DIN Rail Mount
Tekninen dokumentti
Tekniset tiedot
Merkki
Sensata / CrydomMaximum Load Current
4.8 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 V ac → 30 V ac, 18 V dc → 30 V dc
Number of Poles
3
Terminal Type
Screw
Series
DRC
Load Voltage Range
48 V ac → 510V ac
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Depth
96.02mm
Minimum Operating Temperature
-30°C
Mounting Style
DIN Rail Mount
Pole and Throw Configuration
3P
Alkuperämaa
Mexico
Tuotetiedot
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
€ 99,50
€ 99,50 kpl (ilman ALV)
€ 124,87
€ 124,87 kpl (Sis ALV:n)
1
€ 99,50
€ 99,50 kpl (ilman ALV)
€ 124,87
€ 124,87 kpl (Sis ALV:n)
1
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
Tekninen dokumentti
Tekniset tiedot
Merkki
Sensata / CrydomMaximum Load Current
4.8 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 V ac → 30 V ac, 18 V dc → 30 V dc
Number of Poles
3
Terminal Type
Screw
Series
DRC
Load Voltage Range
48 V ac → 510V ac
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Depth
96.02mm
Minimum Operating Temperature
-30°C
Mounting Style
DIN Rail Mount
Pole and Throw Configuration
3P
Alkuperämaa
Mexico
Tuotetiedot
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.