Tekninen Dokumentti
Tekniset tiedot
Merkki
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 55 V ac
Number of Outputs
2
Secondary Current
4.167A
Weight
0.45kg
Power
50VA
Diameter
80mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Minimum Operating Temperature
0°C
Winding Type
Primary Winding, Secondary Winding
Maximum Operating Temperature
180°C
Height
33mm
Termination Type
Lead Wire
Standards/Approvals
BS415, UL506, UL5, VDE0550, EN61558, EN60065
Tuotetiedot
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 66,00
€ 66,00 kpl (ilman ALV)
€ 82,83
€ 82,83 kpl (Sis ALV:n)
1
€ 66,00
€ 66,00 kpl (ilman ALV)
€ 82,83
€ 82,83 kpl (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
1
| Määrä | Yksikköhinta |
|---|---|
| 1 - 9 | € 66,00 |
| 10 - 24 | € 62,00 |
| 25 - 49 | € 55,50 |
| 50 - 74 | € 49,10 |
| 75+ | € 42,50 |
Tekninen Dokumentti
Tekniset tiedot
Merkki
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 55 V ac
Number of Outputs
2
Secondary Current
4.167A
Weight
0.45kg
Power
50VA
Diameter
80mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Minimum Operating Temperature
0°C
Winding Type
Primary Winding, Secondary Winding
Maximum Operating Temperature
180°C
Height
33mm
Termination Type
Lead Wire
Standards/Approvals
BS415, UL506, UL5, VDE0550, EN61558, EN60065
Tuotetiedot
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.