Legris LF3000 Series Tee Threaded Adaptor, Push In 10 mm to Push In 10 mm, Threaded-to-Tube Connection Style
Tekninen dokumentti
Tekniset tiedot
Merkki
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Tube Connection B - Type
Push In
Alkuperämaa
France
Tuotetiedot
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees
€ 27,60
€ 13,80 1 kpl (2 kpl/pakkaus) (ilman ALV)
€ 34,64
€ 17,319 1 kpl (2 kpl/pakkaus) (Sis ALV:n)
2
€ 27,60
€ 13,80 1 kpl (2 kpl/pakkaus) (ilman ALV)
€ 34,64
€ 17,319 1 kpl (2 kpl/pakkaus) (Sis ALV:n)
2
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
| Määrä | Yksikköhinta | Per Pakkaus |
|---|---|---|
| 2 - 8 | € 13,80 | € 27,60 |
| 10 - 18 | € 13,40 | € 26,80 |
| 20+ | € 12,50 | € 25,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Tube Connection B - Type
Push In
Alkuperämaa
France
Tuotetiedot
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.