Tekninen dokumentti
Tekniset tiedot
Merkki
BartecDimensions L x W x H
122 x122 x 82mm
Dimensions (L x W x H)
122 x122 x 82mm
Length
122mm
Width
122mm
Height
82mm
IP Rating
IP66
Colour
Black
Hazardous Area Certification
ATEX
Series
GB
Alkuperämaa
Germany
Tuotetiedot
GRP EExe Junction Boxes
Introducing the range of OTB junction boxes from Bartec. Manufactured of high impact resistance, glass-fibre reinforced polyester SMC & DMC providing extraordinary stability and corrosion resistance. The standard enclosure consists of black, antistatic material. All OTB junction boxes have been tested and approved by the BASEEFA authorities according to the latest European Standards. These correspond to the requirements of the EC directive 94/9/EC (ATEX).
Features and Benefits:
Made from high-quality antistatic, glass-fibre reinforced polyester
Operating temperature from -25 °C to +40 °C (-55°C to +65°C for extended ambient temperature range only)
IP66 water resistance
High impact resistance (energy greater than 2 x 7 Nm)
Flame retardant: IEC 92.1, UL94VO
Zinc-plated steel earth continuity plate with clearance holes with raised dimples to provide a high-pressure electrical contact between cable gland and earth plate
Contains 5 x AKZ4 terminals and 1 x AKE earth terminal
ATEX and BASEEFA certified
Captive lid screws
Silicon O ring lid seal
Available in black
OTB Junction boxes are available in 2 sizes:
Bartec ATEX Junction Box, IP66, 80mm x 75mm x 55mm (535-1426)
Bartec ATEX Junction Box, IP66, 122mm x 122mm x 82mm (535-1432)
Typical Application:
Junctions Boxes are primarily used in building construction and are designed to provide protection to wiring circuits and electrical connections for easy access. Boxes are usually made from metal or heavy-duty plastic and in most situations can be used both indoor and outdoor due to water and impact resistance.
Typically junction boxes are used for:
Connecting additional sockets to circuits
Adding lighting points
Extending circuits
Electricity circuit repairs
Approvals & Certification:
ATEX EC directive 94/9/EC
BAS 98 ATEX 3089U
BASEEFA
EN 50014
II 2 G Exeb IICT6 Gb increased safety
BS EN 50014, BS EN 50019; 1994
BS EN 50281-1-1; 1998
IP 66 (EN 60529/IEC 60529)
FAQs:
Does this box come with terminal?
Yes, 5 x AKZ4 terminals and 1 x AKE earth terminal
What's included in the set?
Boxes are supplied complete with:
lid screws
instruction sheet
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 170,00
kpl (ilman ALV)
€ 213,35
kpl (Sis ALV:n)
1
€ 170,00
kpl (ilman ALV)
€ 213,35
kpl (Sis ALV:n)
1
Osta irtotavarana
Määrä | Yksikköhinta |
---|---|
1 - 9 | € 170,00 |
10 - 14 | € 161,00 |
15+ | € 150,00 |
Tekninen dokumentti
Tekniset tiedot
Merkki
BartecDimensions L x W x H
122 x122 x 82mm
Dimensions (L x W x H)
122 x122 x 82mm
Length
122mm
Width
122mm
Height
82mm
IP Rating
IP66
Colour
Black
Hazardous Area Certification
ATEX
Series
GB
Alkuperämaa
Germany
Tuotetiedot
GRP EExe Junction Boxes
Introducing the range of OTB junction boxes from Bartec. Manufactured of high impact resistance, glass-fibre reinforced polyester SMC & DMC providing extraordinary stability and corrosion resistance. The standard enclosure consists of black, antistatic material. All OTB junction boxes have been tested and approved by the BASEEFA authorities according to the latest European Standards. These correspond to the requirements of the EC directive 94/9/EC (ATEX).
Features and Benefits:
Made from high-quality antistatic, glass-fibre reinforced polyester
Operating temperature from -25 °C to +40 °C (-55°C to +65°C for extended ambient temperature range only)
IP66 water resistance
High impact resistance (energy greater than 2 x 7 Nm)
Flame retardant: IEC 92.1, UL94VO
Zinc-plated steel earth continuity plate with clearance holes with raised dimples to provide a high-pressure electrical contact between cable gland and earth plate
Contains 5 x AKZ4 terminals and 1 x AKE earth terminal
ATEX and BASEEFA certified
Captive lid screws
Silicon O ring lid seal
Available in black
OTB Junction boxes are available in 2 sizes:
Bartec ATEX Junction Box, IP66, 80mm x 75mm x 55mm (535-1426)
Bartec ATEX Junction Box, IP66, 122mm x 122mm x 82mm (535-1432)
Typical Application:
Junctions Boxes are primarily used in building construction and are designed to provide protection to wiring circuits and electrical connections for easy access. Boxes are usually made from metal or heavy-duty plastic and in most situations can be used both indoor and outdoor due to water and impact resistance.
Typically junction boxes are used for:
Connecting additional sockets to circuits
Adding lighting points
Extending circuits
Electricity circuit repairs
Approvals & Certification:
ATEX EC directive 94/9/EC
BAS 98 ATEX 3089U
BASEEFA
EN 50014
II 2 G Exeb IICT6 Gb increased safety
BS EN 50014, BS EN 50019; 1994
BS EN 50281-1-1; 1998
IP 66 (EN 60529/IEC 60529)
FAQs:
Does this box come with terminal?
Yes, 5 x AKZ4 terminals and 1 x AKE earth terminal
What's included in the set?
Boxes are supplied complete with:
lid screws
instruction sheet