Tekninen dokumentti
Tekniset tiedot
Merkki
RepRapProTeknologia
FDM
Build Volume
200 x 200 x 200mm
Number of Heads
1
Model
Ormerod 2
Multi Material Printing
Yes
Dimensions L x W x H
500 x 460 x 410mm
Filament Diameter
1.75mm
Connectivity
Ethernet
Minimum Layer Height
0.1mm
Plug Type
Type A - USA 2-Pin, Type C - European Plug, Type G - British 3-Pin, Type I - Australian 3-Pin
Weight
7kg
Alkuperämaa
United Kingdom
Tuotetiedot
RepRapPro Ormerod 2 Full 3D Printer
The RepRapPro Ormerod 2 complete 3D printing kit offers extensive versatility and functionality in an easy to assemble kit of parts. 3D printing enables electronics and mechanical engineers to create quick turnaround prototypes and save months in the design cycle.
Using a process known as fused filament fabrication (FFF), the Ormerod builds 3dimensional objects in a variety of colours and plastics. FFF can create almost any shape which can be modelled on a computer, including some which could not be produced by traditional manufacturing techniques at all.
The Reprap software should run on a fairly low powered PC, so long as it can run at least Windows XP or higher (Windows 7 and 8 are fine), or Ubuntu 12.04 or higher. However, the faster the better. Under Mac OS X, 10.6.8 is the minimum requirement, which means the Intel processorbased Macs. This excludes all the old PowerPC (G4, G5) Macs, which have a different architecture, so the software won't run on them
Supplied with
All printed parts
All hardware (threaded and smooth rods, screws, nuts, washers, belts, bearings etc)
Presoldered
and programmed electronics
MicroSD card + adapter
Heated PCB build surface
Motors
Nozzle assembly and extruder drive mechanism
100m of 1.75mm diameter PLA filament (approx 300g) for printing with
Plugs supplied (UK, EU, US, and AUS)
Software to run the machine is also provided with both, including the firmware for the electronics
1x reel of filament colour
White
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
P.O.A.
1
P.O.A.
1
Tekninen dokumentti
Tekniset tiedot
Merkki
RepRapProTeknologia
FDM
Build Volume
200 x 200 x 200mm
Number of Heads
1
Model
Ormerod 2
Multi Material Printing
Yes
Dimensions L x W x H
500 x 460 x 410mm
Filament Diameter
1.75mm
Connectivity
Ethernet
Minimum Layer Height
0.1mm
Plug Type
Type A - USA 2-Pin, Type C - European Plug, Type G - British 3-Pin, Type I - Australian 3-Pin
Weight
7kg
Alkuperämaa
United Kingdom
Tuotetiedot
RepRapPro Ormerod 2 Full 3D Printer
The RepRapPro Ormerod 2 complete 3D printing kit offers extensive versatility and functionality in an easy to assemble kit of parts. 3D printing enables electronics and mechanical engineers to create quick turnaround prototypes and save months in the design cycle.
Using a process known as fused filament fabrication (FFF), the Ormerod builds 3dimensional objects in a variety of colours and plastics. FFF can create almost any shape which can be modelled on a computer, including some which could not be produced by traditional manufacturing techniques at all.
The Reprap software should run on a fairly low powered PC, so long as it can run at least Windows XP or higher (Windows 7 and 8 are fine), or Ubuntu 12.04 or higher. However, the faster the better. Under Mac OS X, 10.6.8 is the minimum requirement, which means the Intel processorbased Macs. This excludes all the old PowerPC (G4, G5) Macs, which have a different architecture, so the software won't run on them
Supplied with
All printed parts
All hardware (threaded and smooth rods, screws, nuts, washers, belts, bearings etc)
Presoldered
and programmed electronics
MicroSD card + adapter
Heated PCB build surface
Motors
Nozzle assembly and extruder drive mechanism
100m of 1.75mm diameter PLA filament (approx 300g) for printing with
Plugs supplied (UK, EU, US, and AUS)
Software to run the machine is also provided with both, including the firmware for the electronics
1x reel of filament colour
White