RS PRO Type K Mineral Insulated Thermocouple 300mm Length, 3mm Diameter → +1000°C
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProThermocouple Type
K
Probe Diameter
3mm
Probe Length
300mm
Probe Material
316 Stainless Steel
Maximum Temperature Sensed
+1000°C
Termination Type
Bare Wire Tail
Cable Length
1m
Standards Met
BS
Alkuperämaa
United Kingdom
Tuotetiedot
Type K Thermocouple, St. Steel 300mm Probe, Mineral Insulated
1m of PTFE insulated lead with M8 threaded connection to the thermocouple and stainless steel sheath. 316 stainless steel probe, 3mm. Temp. range 0 to +1000°C. Gland available 1/8 BSP, see stock no. 158-610
Old Colour Code, BS1843
Thermocouples, bayonet adaptors, compensating and extension cables and connectors.,These BS1843 products are being phased out, having been replaced with a new colour code standard BS4937 Part 30 1993 (IEC 584-3 1989 modified for international use). System Calibration is available on selected probes and includes the full charge of the instrument and probe.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 29,40
kpl (ilman ALV)
€ 36,90
kpl (Sis ALV:n)
1
€ 29,40
kpl (ilman ALV)
€ 36,90
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 29,40 |
| 5 - 9 | € 27,70 |
| 10+ | € 26,20 |
Tekninen dokumentti
Tekniset tiedot
Merkki
RS ProThermocouple Type
K
Probe Diameter
3mm
Probe Length
300mm
Probe Material
316 Stainless Steel
Maximum Temperature Sensed
+1000°C
Termination Type
Bare Wire Tail
Cable Length
1m
Standards Met
BS
Alkuperämaa
United Kingdom
Tuotetiedot
Type K Thermocouple, St. Steel 300mm Probe, Mineral Insulated
1m of PTFE insulated lead with M8 threaded connection to the thermocouple and stainless steel sheath. 316 stainless steel probe, 3mm. Temp. range 0 to +1000°C. Gland available 1/8 BSP, see stock no. 158-610
Old Colour Code, BS1843
Thermocouples, bayonet adaptors, compensating and extension cables and connectors.,These BS1843 products are being phased out, having been replaced with a new colour code standard BS4937 Part 30 1993 (IEC 584-3 1989 modified for international use). System Calibration is available on selected probes and includes the full charge of the instrument and probe.