SKF Bearing Heater 20mm To 300mm Bore Size TIH30M/230V + TMFT 36

RS tilauskoodi: 788-3653Tuotemerkki: SKFValmistajan osanumero.: TIH030M/230V+TMFT36
brand-logo
Näytä kaikki Bearing Heaters tuotteet

Tekninen dokumentti

Tekniset tiedot

Merkki

SKF

Supply Voltage

110 V, 230 V

Maximum Bore Size

300mm

Minimum Bore Size

20mm

Alkuperämaa

Netherlands

Tuotetiedot

Portable Induction Heater TIH 030m with FREE Bearing fitting tool kit TMFT 36

The new SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater’s housing allows the heating of bearings weighing up to 40 kg (88 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50–60Hz and 100–110V/50–60Hz

Saatat olla kiinnostunut
SKF Bearing Heater 20mm To 300mm Bore Size TIH 030M/230V
€ 4 844,30kpl (ilman ALV)

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

Hintaa ei saatavilla

SKF Bearing Heater 20mm To 300mm Bore Size TIH30M/230V + TMFT 36

Hintaa ei saatavilla

SKF Bearing Heater 20mm To 300mm Bore Size TIH30M/230V + TMFT 36
Varastotiedot eivät ole tilapäisesti saatavilla.
Saatat olla kiinnostunut
SKF Bearing Heater 20mm To 300mm Bore Size TIH 030M/230V
€ 4 844,30kpl (ilman ALV)

Tekninen dokumentti

Tekniset tiedot

Merkki

SKF

Supply Voltage

110 V, 230 V

Maximum Bore Size

300mm

Minimum Bore Size

20mm

Alkuperämaa

Netherlands

Tuotetiedot

Portable Induction Heater TIH 030m with FREE Bearing fitting tool kit TMFT 36

The new SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater’s housing allows the heating of bearings weighing up to 40 kg (88 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50–60Hz and 100–110V/50–60Hz

Saatat olla kiinnostunut
SKF Bearing Heater 20mm To 300mm Bore Size TIH 030M/230V
€ 4 844,30kpl (ilman ALV)