Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivitySleeve Diameter
4.8mm
Colour
Black
Shrunk Diameter
1.5mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
No
Series
SCL
Tuotetiedot
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 10,80
1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 13,554
1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
€ 10,80
1 kpl (5 kpl/pakkaus) (ilman ALV)
€ 13,554
1 kpl (5 kpl/pakkaus) (Sis ALV:n)
5
Osta irtotavarana
Määrä | Yksikköhinta | Per Pakkaus |
---|---|---|
5 - 70 | € 10,80 | € 54,00 |
75 - 245 | € 10,30 | € 51,50 |
250+ | € 9,70 | € 48,50 |
Tekninen dokumentti
Tekniset tiedot
Merkki
TE ConnectivitySleeve Diameter
4.8mm
Colour
Black
Shrunk Diameter
1.5mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
No
Series
SCL
Tuotetiedot
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.