3M, ST, PC Single Mode Fibre Optic Connector 125μm Fibre Size, 0.2dB Insertion Loss
Tekninen dokumentti
Tekniset tiedot
Merkki
3MConnector Type
ST
Connector Polish
PC
Single/Multimode
Single Mode
Fibre Size
125µm
Insertion Loss
0.2dB
Jacket Diameter
3mm
Colour
Yellow
Maximum Operating Temperature
+60°C
Minimum Operating Temperature
-10°C
Alkuperämaa
United States
Tuotetiedot
3M ST, SC and LC Hot Melt Fibre Optic Connectors
Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.
Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.
The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 20,30
kpl (ilman ALV)
€ 25,48
kpl (Sis ALV:n)
1
€ 20,30
kpl (ilman ALV)
€ 25,48
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 24 | € 20,30 |
| 25 - 99 | € 17,20 |
| 100+ | € 15,40 |
Tekninen dokumentti
Tekniset tiedot
Merkki
3MConnector Type
ST
Connector Polish
PC
Single/Multimode
Single Mode
Fibre Size
125µm
Insertion Loss
0.2dB
Jacket Diameter
3mm
Colour
Yellow
Maximum Operating Temperature
+60°C
Minimum Operating Temperature
-10°C
Alkuperämaa
United States
Tuotetiedot
3M ST, SC and LC Hot Melt Fibre Optic Connectors
Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.
Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.
The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.