4D Systems, 1.5in Arduino Compatible Display with OLED Display

RS tilauskoodi: 171-1829Tuotemerkki: 4D SystemsValmistajan osanumero.: UOLED-128G2-AR
brand-logo

Tekninen dokumentti

Tekniset tiedot

Diagonal Display Size

1.5in

Display Technology

OLED Display

Display Resolution

128 x 128pixel

Viewing Area Dimensions

27 x 27mm

Dimensions

45.5 x 36.0 x 13.7mm

For Use With

Arduino

Tuotetiedot

4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino

The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

4D Systems Passive Matrix OLED Displays

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 86,00

1 kpl (25 kpl/laatikko) (ilman ALV)

€ 106,64

1 kpl (25 kpl/laatikko) (Sis ALV:n)

4D Systems, 1.5in Arduino Compatible Display with OLED Display

€ 86,00

1 kpl (25 kpl/laatikko) (ilman ALV)

€ 106,64

1 kpl (25 kpl/laatikko) (Sis ALV:n)

4D Systems, 1.5in Arduino Compatible Display with OLED Display
Varastotiedot eivät ole tilapäisesti saatavilla.

Tekninen dokumentti

Tekniset tiedot

Diagonal Display Size

1.5in

Display Technology

OLED Display

Display Resolution

128 x 128pixel

Viewing Area Dimensions

27 x 27mm

Dimensions

45.5 x 36.0 x 13.7mm

For Use With

Arduino

Tuotetiedot

4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino

The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

4D Systems Passive Matrix OLED Displays