Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin

RS tilauskoodi: 177-5543Tuotemerkki: Allegro MicrosystemsValmistajan osanumero.: A1101ELHLT-T
brand-logo
Näytä kaikki Motion Sensor ICs tuotteet

Tekninen dokumentti

Tekniset tiedot

Sensor Type

Hall Effect Sensors

Mounting Type

Surface Mount

Magnetic Type

Unipolar

Maximum Operating Supply Voltage

24 V

Minimum Operating Supply Voltage

3.8 V

Package Type

SOT-23

Height

0.95mm

Dimensions

2.98 x 1.91 x 0.95mm

Minimum Operating Temperature

-40 °C

Pin Count

3

Maximum Operating Temperature

+85 °C

Typical Magnetic Sensor Hysteresis

55 Gs

Alkuperämaa

Philippines

Tuotetiedot

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Hall Effect Sensors, Allegro MicroSystems

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 0,843

1 kpl (3000 kpl/kela) (ilman ALV)

€ 1,045

1 kpl (3000 kpl/kela) (Sis ALV:n)

Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin

€ 0,843

1 kpl (3000 kpl/kela) (ilman ALV)

€ 1,045

1 kpl (3000 kpl/kela) (Sis ALV:n)

Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
Varastotiedot eivät ole tilapäisesti saatavilla.

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Sensor Type

Hall Effect Sensors

Mounting Type

Surface Mount

Magnetic Type

Unipolar

Maximum Operating Supply Voltage

24 V

Minimum Operating Supply Voltage

3.8 V

Package Type

SOT-23

Height

0.95mm

Dimensions

2.98 x 1.91 x 0.95mm

Minimum Operating Temperature

-40 °C

Pin Count

3

Maximum Operating Temperature

+85 °C

Typical Magnetic Sensor Hysteresis

55 Gs

Alkuperämaa

Philippines

Tuotetiedot

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Hall Effect Sensors, Allegro MicroSystems