Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin

RS tilauskoodi: 170-9108Tuotemerkki: Allegro MicrosystemsValmistajan osanumero.: A1120LUA-T
brand-logo
Näytä kaikki Motion Sensor ICs tuotteet

Tekninen dokumentti

Tekniset tiedot

Sensor Type

Hall Effect Sensors

Mounting Type

Through Hole

Magnetic Type

Unipolar

Maximum Operating Supply Voltage

24 V

Minimum Operating Supply Voltage

3 V

Height

3.02mm

Dimensions

4.09 x 1.52 x 3.02mm

Pin Count

3

Maximum Operating Temperature

+150 °C

Package Type

SIP

Minimum Operating Temperature

-40 °C

Typical Magnetic Sensor Hysteresis

10 Gs

Tuotetiedot

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Hall Effect Sensors, Allegro MicroSystems

Varastotiedot eivät ole tilapäisesti saatavilla.

Tarkista myöhemmin uudelleen.

Varastotiedot eivät ole tilapäisesti saatavilla.

€ 0,96

1 kpl (500 kpl/pussi) (ilman ALV)

€ 1,19

1 kpl (500 kpl/pussi) (Sis ALV:n)

Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin

€ 0,96

1 kpl (500 kpl/pussi) (ilman ALV)

€ 1,19

1 kpl (500 kpl/pussi) (Sis ALV:n)

Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
Varastotiedot eivät ole tilapäisesti saatavilla.

Ideoi. Luo. Tee yhteistyötä

LIITY ILMAISEKSI

Ei piilokuluja!

design-spark
design-spark
  • Lataa ja käytä DesignSpark-ohjelmistoamme piirilevyjen ja 3D-mekaniikan suunnitteluun.
  • Selaa ja osallistu nettisivujen sisältöön ja keskusteluihin.
  • Lataa 3D-malleja, piirustuksia ja pohjakuvia yli miljoonasta tuotteesta.
Klikkaa tästä saadaksesi lisätietoja

Tekninen dokumentti

Tekniset tiedot

Sensor Type

Hall Effect Sensors

Mounting Type

Through Hole

Magnetic Type

Unipolar

Maximum Operating Supply Voltage

24 V

Minimum Operating Supply Voltage

3 V

Height

3.02mm

Dimensions

4.09 x 1.52 x 3.02mm

Pin Count

3

Maximum Operating Temperature

+150 °C

Package Type

SIP

Minimum Operating Temperature

-40 °C

Typical Magnetic Sensor Hysteresis

10 Gs

Tuotetiedot

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Hall Effect Sensors, Allegro MicroSystems